Purchasing hotline：886-4-23286708
上一张
下一张
Consultation hotline00886-4-23286708
Engineered specifically for large-scale wooden creations, our Air-Drying Coating not only solidifies perfectly within a mere 10-30 minutes without any external heating but also radiates an unparalleled glossy finish and robustness. This coating emphasizes the natural beauty of your products and guarantees enduring color vibrancy.
(1) Rapid Drying: Relying on solvent evaporation or reaction with ambient
moisture, our primer delivers ultra-fast drying times, ensuring efficient workflow.
(2) Easy Application: No mixing required. Apply directly, streamlining the
coating process for an effortless application.
(1) Versatile Use: With exceptional adhesion properties, our color coat can be applied to a variety of wood surfaces with ease.
(2) Enhanced Aesthetics: A broad spectrum of color choices that amplify the natural beauty of wood.
(1) Durable Protection: Our top coat ensures prolonged protection,
effectively defending against environmental factors.
(2) Eco-friendly: Innovative technology ensures our coatings are low or
no-VOC, offering an environmentally conscious choice.
| Product Specifications |
Main Component: TP System |
Thinner: Air-drying thinner |
| Mixing Ratio | 1 part | 1-1.5 parts |
| Filter Mesh | Using a 200-300 mesh sieve | |
| Spray Gun, Air Pressure | 3-4gf/cm2 | |
| Film Thickness | 10±2um | |
| Drying Method |
Air dry Note: For accelerated curing ( Bake at 60°C for 30 minutes) |
|
| Packaging Conditions | After stabilizing at 60°C for 30 minutes, allow 3-5 hours for complete cooling before packaging. | |
| Physical Testing Conditions | 60°C (2-4 hrs) or 80°C (1-2 hrs), stabilize for 4-6 hrs, then proceed with physical tests. | |
| Suitable Substrates | Wood | |
| Test Items | Test Conditions | Test Results | |
| 1 | Adhesion | The sample is placed flat and scored both horizontally and vertically using a 100-grid knife. After cleaning the scored section, 3M#610 tape is applied over the grid. The tape is then pulled off at a 45° angle three times, resulting in a 5B adhesion rating. | 5B |
| 2 | Hardness | Sharpen a Mitsubishi H-grade pencil on sandpaper. Apply 500g weight and glide at a 45° angle from F to H. Ensure no scratches | F-H No scratches |
| 3 | Film Thickness | Electronic coating thickness gauge | 10±2um |
| 4 | Alcohol Resistance Test |
Rubbing Material: Cloth saturated with 99.5% alcohol. Load: 500g. Rubbing Distance: 3cm per cycle. Frequency: 30 cycles per minute. Criteria: The coating should exhibit no exposure of the underlying material (paint) after more than 200cycles. |
No substrate exposure observed |
| 5 | RCA Test | Using a 175g load and tape, the coating is rubbed 30 times without exposing the substrate (paint). | No substrate exposure observed |
| 6 | Boiling Water Resistance | It was submerged in an 80℃ water bath for 2 hours. The surface remains unchanged with a 5B pencil hardness test result. | No visible abnormalities, 5B hardness achieved. |
| 7 | High Temperature and Humidity Resistance | Exposed to 65℃ and 95% humidity for 120 hours, followed by a 6-hour recovery at room temperature. Post-examination shows no abnormalities with a 5B pencil hardness test result. | No visible abnormalities, 5B hardness achieved. |
| 8 | High Temperature Storage | Stored in a 70℃ environment for 48 hours, then allowed 4 hours to return to room temperature. Post-examination shows no abnormalities with a 5B pencil hardness test result. | No visible abnormalities, 5B hardness achieved. |
| 9 | Low Temperature Storage | Placed in a -40℃ environment for 48 hours, followed by a 4-hour recovery at room temperature. Post-examination shows no abnormalities with a 5B pencil hardness test result. | No visible abnormalities, 5B hardness achieved. |
| 10 | Thermal Shock Resistance | Alternated between 80℃ and -40℃, each temperature held for 1.5 hours with a 20-minute transition time, for a total of 20 cycles. Allowed 4 hours of recovery at room temperature. The surface should show no discoloration, blistering, peeling, shedding, or gloss variance. | No visible abnormalities, 5B hardness achieved. |
| 11 | Temperature and Humidity Cycling | Alternated between 65℃ at 95% humidity and -40℃, each condition held for 1.5 hours with a 20-minute transition time, for a total of 20 cycles. Allowed 4 hours of recovery at room temperature. The surface should show no discoloration, blistering, peeling, shedding, or gloss variance. | No visible abnormalities, 5B hardness achieved. |
Related Products
Elevate your metal in just moments
Learn More
Every drop, for plastic perfection.
Learn More
Paint the Natural, Display the Beauty
Learn More
Golden Point Chemical Co. Ltd.,
+886-4-23286708
WhatsApp:886929921006
Taiwan Office Address in China: B1, 24th Floor, No. 307, Section 2, Taiwan Boulevard, West District, Taichung City
Copyright© 2023 Golden Point Chemical Co. Ltd. All Rights Reserved.
Online consultation